Controller H-60VA for MediCrystal® Bio-Magnetic PEMF V-Mats and Belts

Quickstart Guide for H-60VA controller

Video how to use the MediCrystal H-60-VA controller with adjustable PEMF frequency

H-60VA is the newest controller for FIR PEMF MediCrystal® Warming Mattresses and Belts with natural Amethyst and Tourmaline and variable PEMF frequency.
You can use the Controller to Set & Maintain 86°-158°F (displayed as 30°-70°C) heating Temperature for 1, 4, 8 or 12 Hours and to adjust Pulsed Magnetism frequencies in the range between 1 and 30 Hz manually or select one of 12-13 programs.

For the extended programs, the blue indicator #12 blinks typically only during the first cycle to not disturb you if you sleep. 

If You Set Heating Higher than 122°F (50°C) for Longer than 3.5 Hours, an Auto-Protection Feature will Decrease it to Safe 115°F to protect you from dehydration. 
If necessary, you can manually activate or deactivate this feature by pressing and holding the timer button for several seconds.
The power input 110-120V/60Hz. Do not use in 220v countries without the power converters of 500-1000w capacity.
In addition to hot stone functionality and deep FIR heat, MediCrystal® Amethyst-Tourmaline mats naturally generate negative ions.
Though the mat does not have an ion button or indicator, anions are always produced through distinct layers upon heat distortion when the infrared mat is ON or using your body heat when the device is OFF. It is a great reason to use the mattress regularly to sleep, relax and reenergize even without heating.

NEVER PUT SOLID OBJECTS, RUBBER, OR FOAM NON-PERMEABLE MATS ON TOP OF THE HEATING SURFACE TO AVOID  OVERHEAT THE SYSTEM WEARING OFF AND FIRE DANGER.

Still need help? Contact Us Contact Us