ThermoGem PEMF Photon Belt Quick Start Guide

THERMOGEM FIR PEMF PHOTON BELT QUICKSTART GUIDES

This product is the top quality heated stone belt with three types of crushed and polished natural semi-precious crystals of Amethyst, Tourmaline, and Jade.

Large Tourmaline Ceramic Hexagons naturally increase the Negative Ions output using heat distortion or your body's warmth.

For PEMF magnetism and Red Light Photon sessions, you need to use the belt connected to the power socket.

However, you can pre-heat the belt for warmed stone therapy, unplug it, and carry it concealed under your clothes while you are walking at home or even outside.

Red Light helps to improve the look and appearance of the skin. It helps to get rid of seasonal blue feelings.

The PEMF pulsed magnetism is like a battery charger helpful to restore those energies which empower us for everyday life.

If you are falling asleep, the best way to use it is to turn off PEMF and Photon functions so that they do not wake you up when the Red Light resumes in 4 hours or if PEMF auto cycling is active. But the most important is to choose 30°C to 40°C low levels of FIR Heat before going to bed.

ThermoGem combines all these features in one affordable home-use appliance.

You can put the wide part of the belt on the belly (before meals, of course) or your back. It wraps your sides with comfort as well.

It is one of our favorite products. My wife uses the belt without electricity to manage her periods' discomfort, and I use it for my lower back issue. I hope you will enjoy it too.

You can use this belt on its own or together with MediCrystal or ThermoGem vest or jacket.

Also, please make sure you read the following sections:

WARNINGS

CONTRAINDICATIONS

THERMOGEM FIR PEMF PHOTON BELT CONTROLLERS

Your Belt may come with either E-20PV, H-40PV (10Hz PEMF Single Frequency), or a newer H-60PVA (1-30Hz Adjustable Frequency) controller. All these controllers are interchangeable.

Controller E-20PV for Photon and PEMF mini mats and belts
Controller H-40PV Photon and PEMF mats
Controller H-60PVA for ThermoGem PEMF Photon Mats, Belts, Vests

The controllers allow you to entirely adjust heating function with a 1-degree C step from 86°F to 158°F displayed in Celsius from 30°C to 70°C.

If you have an H60PVA controller, you can also adjust PEMF frequency between 1 and 30Hz, or select one of the 13 auto-programs.

Other controllers provide only one PEMF setting of 10Hz (10 times per second), a universal one.

You can connect the controller through an external timer for sleeping. A heavy-duty one with a built-in surge protector may be the right choice for double protection and precise time setting.

Make sure the voltage of your power grid is the same as that of your appliance. If you use the 110V Belt with a 220V power socket, it will damage the product. Please use only the same voltage product as your country's power grid.

When you start, FIRST, please connect the controller tightly to the belt. Only then plug the controller into the power socket.

The connection should be a snug fit. If it is loose or you plug the controller into the power outlet before connecting it to the belt, the product may not function correctly.

If you do not use the belt, unplug the controller from the power socket but no need to disconnect it from the belt receptacle frequently. It will protect connectors from wearing and becoming loose.