Controller E-20V for MediCrystal Amethyst Tourmaline PEMF V-mat mini and belt
Controller E-20V for MediCrystal® Amethyst Tourmaline Bio-magnetic PEMF V-mats mini and belts
E-20V controller allows you to use your Red-Brown FIR Photon Amethyst Tourmaline V-mat Mini or Bio-Magnetic belt in several modes together or each separately.
1. Only Heat (FIR) - The controller allows you to entirely adjust heating function with a 1-degree C step from 86°F to 158°F displayed in Celsius from 30°C to 70°C.
2. Only PEMF (pulsed magnetism with 10Hz or ten times per second frequency).
3. Combination or Ion, PEMF, and Far-Infrared Heating together.
We used this controller for small PEMF V-mats and Belts in 2015-2018.
You can replace E-20V only with another E-20V or with a large professional controller F-40V. The replacement controller should be with the connector "A" with five pins the same as the original E-20V.
Other remotes such as H-40V (10Hz) or H-60VA with adjustable PEMF frequency from 1 to 30Hz will not replace the E-20V controller, because they use connector type "B" 3+2 pins.
The controllers L-40V and L-40VA are not interchangeable with the E-20V even if they have the same "A" type connector.
All controllers are without negative ion indicators, but the crystals and anion layers always generate ions when the pad is heated. If the vest is not powered, they use your body's warmth to naturally and gently release FIR and anions.
If you feel that 8 hours (built-in auto-timer shut off) period is too long, use an external timer can for a more comfortable choice of time settings. A heavy-duty plug-in timer with a built-in surge protector may be the right choice for double protection in the night time.
Make sure the voltage of your power grid is the same as of your appliance. If you use the 110V Belt with a 220V power socket, it will damage the product. Please use only the same voltage product as your country power grid.
When you start, FIRST please connect the controller tightly to the belt. Only then plug the controller into the power socket.
The connection should be a snug fit. If it is loose or you plug the controller to the power outlet before connecting it to the belt, the product may not function correctly.
If you do not use the belt, unplug the controller from the power socket but no need to disconnect it from the belt receptacle frequently. It will protect connectors from wearing and becoming loose.
BEFORE TURNING ON/OFF E-20V CONTROLLER MAKE SURE THAT THE TEMPERATURE DIAL (#3 IN THE PICTURE) IS IN THE MINIMUM POSITION. OTHERWISE, YOU WILL NOT BE ABLE TO TURN THE CONTROLLER ON AGAIN.